Bing
Ajax  Loading... Please wait...

Popular Brands

Our Newsletter

  • Tool Tipping Materials (Web Page)

    Carbide & Other Tool Tipping Materials   From the book Building Superior Brazed Tools Buy the Book  Considerations in material selection 1. The big question: How much material c ...

  • Cobalt as a Carbide Binder (Web Page)

    Why Cobalt is the Prefered Binder Although nickel and various alloys are used in modern grades, cobalt is still most common.  There are several criteria which govern the performance of a binde ...

  • Cermet Saw Blade Cutting Speed (Web Page)

    Cermet II Saw Blades – Cutting Speed  These test were run on Saw Blades tipped with Cermet II Saw Tips and Carbide Tipped Saw Blades for Comparison.  Refer to our Tool Tipp ...

  • Machine Coolant Filter Systems Annual Cost and Payback (Web Page)

    Adding Machine Coolant Filtration Systems in a Carbide Tool Grinding Operation A shop with six grinders for saws and tools bought six filter units for $9,000.  They bought an additional $600 in ...

  • Machine Coolant Cleaning Systems (Web Page)

    Machine Coolant Cleaning Systems  Contaminated machine coolant are directly responsible for 70% to 90% of machine tool wear and failure.  A filter system that removes contaminants as they ...

  • Why Filter Machine Coolant (Web Page)

    23 Top Reasons to Filter Coolant  Make more money 1.  Longer Machine Life 2.  Longer time between rebuilds 3.  Less down-time 4.  Less equipment replacement 5.  F ...

  • Machine Coolant Health and Safety (Web Page)

    Machine coolant alone can be dangerous.  It is not meant to be breathed.  Fortunately air handling equipment is easy to install and pretty inexpensive. The real health problems arise when ...

  • Importance of Machine Coolant Management (Web Page)

    A great number of industrial processes such as grinding, milling and turning create heat and particles.  Machine coolants are used to keep the work surface cool and to carry away chips and parti ...

  • Particles in Machine Coolant (Web Page)

    Microscopic Particles Damage Tools In Precision Machining  Many machine shops remove the big chips from the machine coolant and consider it clean.  Very few shops adequately filter their m ...

  • Machine Coolant Sump Cleaning (Web Page)

    (This is a cleaning method for cleaning machine coolant sumps running water based machine coolants.  This is, perhaps, overkill in many cases but how much of this to do is your decision.  F ...

  • Gumming Saws (Web Page)

    by Lowell Freeborn Saw gumming is an operation that must be performed on all saws to be retipped.  It must be done accurately so the saw does not run out of balance and the tip recesses ar ...

  • Saw Tips in Oven Cleaner (Web Page)

    Executive Summary:  No effect was found on the carbide or the braze alloy.  Oven cleaner does remove any paint and the expensive plastic coatings which may be the best reason not to use it.

  • Saw Blade Side Grinding (Web Page)

    by Lowell Freeborn The side grinding of carbide saws is the most critical grinding operation as it relates to the saw's performance.  The angles ground in the side are not as important as the u ...

  • Split Tips (Web Page)

    Split Tip Breakage Problem:  Tips are highly susceptible to breakage even during routine handling.  Executive Summary:   The carbide is not strong enough for the applicatio ...

  • Router Bit Comparison (Web Page)

    I was sent two router bits to compare.  One is a famous name bit and the other is a bit that claims to be better.   Executive summary:  The less expensive, less famous bit is bet ...

  • Inspecting a Router Bit (Web Page)

    First, just pick the bit up and look at it.  Does it look even and balanced?   Any dings or similar?  Then spin it in your fingers to see if you notice anything.

  • Basic Router Bit Profiles (Web Page)

    Profile router bits are used to shape lumber edges and mouldings, as well as man-made panel edges such as MDF and Solid Surface into a more decorative form. When these bits are used with a hand-held ...

  • CSM Grinding Shop Order Flow (Web Page)

    1. Receiving - Saws are marked with customer's name with electric etch or engraving tool. Order is written giving any special instructions. 2. Cleaning - Saws are soaked in a solution of Oakite rust ...

  • CSM Side Grinding (Web Page)

    The side grinding of carbide saws is the most critical grinding operation as it relates to the saw's performance.  The angles ground in the side are not as important as the uniformity of the gri ...

  • Technical Info (Web Page)

    We offer professional services in the following areas:  Woodworking Carbide Parts Brazing Carbide Router Bits Saw Blades Machine Coolant Custom Tooling To inquire about the profe ...



Your search for "wihajavascript:void(0)/?_=1" did not match any news or information.

Suggestions:

  • Make sure all words are spelled correctly.
  • Try different keywords.
  • Try more general keywords.