Bing
Ajax  Loading... Please wait...

Popular Brands

Our Newsletter

  • Special Brazing Projects (Web Page)

    You can have parts brazed whether they are simple torch brazing projects or extremely sensitive aerospace projects involving vacuum brazing.       Here are two projects we did ...

  • Calculating the Amount of Brazing Alloy to use (Web Page)

    Braze joints are strongest at about 0.0005” (1/2 of one –thousandth of an inch) but this is not a good standard for two main reasons: As the braze joint gets thicker it provides signi ...

  • Tungsten Carbide Properties (Web Page)

    From the book Building Superior Brazed Tools     Buy the Book  The following is a list of Tungsten Carbide Properties.  Different Grades of Tungsten Carbide will differ in S ...

  • Grinding Carbide- Health and safety risks (Web Page)

     From the book Building Superior Brazed Tools     Buy the Book Contents The Metals Explanation for Non-scientists Air Collection Information and Equipment Hardme ...

  • Cermet II Saw Blades in Industrial Applications (Web Page)

    Cermet II Saw Tips have been used to solve many customer problems and increase cutting speed and wear resistance.  See some of the reviews customers have given the Cermet II Saw Blades ...

  • Tool Tipping Materials continued (Web Page)

    Tool Tipping Materials (continued) Return to Previous page    List of materials Steel Tool Steel (High-speed steel) Cutting / hardfacing alloys with WC (Talonite +WC) Tungsten ca ...

  • Filter Changing Procedure (Web Page)

    Machine Coolant Filtration Units Filter Change ProcedureFor CP 2002 (incl. Wall Mount) & CP 2020   Below are step by step procedure for changing the filter on our CP 2020 and CP 2002 Mac ...

  • How Fine to Filter Coolant (Web Page)

    Relationship Of Particle Size To Machining Tolerances   The machine coolant should be filtered to a particle level that is 10% of the tightest desired tolerance.   If the top line is 0.

  • Bacteria in Machine Coolant (Web Page)

      Dirty machine coolant    60x We received machine coolant that was unusually cloudy.  Under a microscope, we found these growths.  These are mold and bacteria colonie ...

  • Contaminants in Coolant (Web Page)

    Unfiltered Machine Coolant can have a lot of particles, bacteria and other contaminants in it.  Coming up with a Machine Coolant management  Plan witll reduce these contamina ...

  • Excessive Machine Coolant Use (Web Page)

    Excessive machine coolant loss seems to be due to overuse, splashing or changing it too often.  Take a look at some of our other Articles on Machine Coolant in our Coolant filtration Index. 1.& ...

  • Machine Coolant Testing Methods (Web Page)

    Run these tests daily at first.  Once you get the system under control you shouldn't see much change from day to day. Then run the tests weekly. How and When to Test machine coolant - Outs ...

  • Machine Coolant Disposal Regulations (Web Page)

    Machine Coolant Federal Regulations  (Note:  We have corrected the government list to comply with standard chemical notation where we felt it was necessary.  We have included both.)&n ...

  • Filtration Glossary continued n-r (Web Page)

    Machine Coolant Filtration Glossary Here is a glossary of Filtration Terms and their meanings.  Please refer to the Machine Coolant Filtration Index for articles and information on these t ...

  • Cleaning Saw Blades (Web Page)

    Cleaning Saw Blades, Router Bits, & other Carbide Tools  It is important you clean saw blades and other carbide tools regularly as pitch, glues and other materials can build up and severely ...

  • Shipping (Web Page)

    Our shipping policy We can ship most orders internationally. Note that there are restrictions on some products, and some international destinations (please see the International Orders sec ...

  • CSM Planer Combination Style (Web Page)

    4 TOOTH AND RAKER COMBINATION SERVICE SPECIFICATIONS: Hook 15° 4 Teeth 25° A. T. B. 1 Tooth Raker .015 Lower Sides 2° and 3° USE: This is one of the oldest style carbide saws ...

  • CSM Controlled Chip Metal Style (Web Page)

    SERVICE SPECIFICATIONS: Hook 10° Top of Carbide is .008" Above Steel Sides 1° & 2° USE: This is a very rugged design for non-ferrous metal cutting.  The teeth protrude sli ...

  • CSM Chip Breaker Style (Web Page)

    SERVICE SPECIFICATIONS: Standard 10° Hook All Teeth Same Diameter All Corner Chamfers 30° Sides 1° & 2° USE: These tooth styles are used mainly for cutting metals such as a ...

  • Types of Drill Bits (Web Page)

    With dozens of drill bit types and thousands of sizes to choose from we'll explain the differences and help you choose the right drill bit for your application. Anatomy of a drill bit: Material ...



Your search for "wihajavascript:void(0)/?_=1" did not match any news or information.

Suggestions:

  • Make sure all words are spelled correctly.
  • Try different keywords.
  • Try more general keywords.