Bing
Ajax  Loading... Please wait...

Popular Brands

Our Newsletter

  • Carbide Wetting Tests (Web Page)

    From the book Building Superior Brazed Tools  Buy the Book Carbide Wetting Analysis Test #1  We were supplied CWF7150 saw tips.  They came two ways; one was untreated and one had a n ...

  • Daily Machine Coolant Test (Web Page)

    You should do this once at the start of a shift and again at the end of a shift in a one-shift operation or once each shift in a three-shift operation.  You need to keep good records.   ...

  • Disposing of Carbide Sludge (Web Page)

    What follows is based on U.S, and Canadian laws. Individual states, provinces, cities, etc. may have their own regulations. We believe that this information will apply in 98% of all cases but we cann ...

  • Simple Solutions to Brazing Problems (Web Page)

    About 80 - 90% that these answers will solve these problems.  If you want more details you can go to our Braze Failure Analysis page.  Or buy the books.  You can also call 1-800 346- ...

  • CSM Gumming (Web Page)

    Saw gumming is an operation that must be performed on all saws to be retipped.  It must be done accurately so the saw does not run out of balance and the tip recesses are all the same depth.&nbs ...

  • Bad Surface and Gumming (Web Page)

       Chrome Plating Not Gummed Out of Notch   These are the tips we broke out of a saw.  Two that were side ground  and one that had just been brazed into the saw and n ...

  • Inspecting Sharpened Saw Blades (Web Page)

    Everyone knows about the guy who shows up at your shop and promises you something “just as good” for “a lot less money”.   With cheap equipment, sloppy work and a l ...

  • Machine Coolant Management Program (Web Page)

    The three components of a successful machine coolant management program are: Administration Machine coolant Monitoring and Maintenance Machine coolant Recycling  Introduction A great nu ...

  • Frequently Asked Questions (Web Page)

    1. What are your shipping options? We ship most of our products via UPS and FedEx. At checkout, you have the option of selecting FedEx Ground, or UPS Ground, UPS Next Day Air, UPS 2nd Day Air and UP ...

  • Saw Tip Grinds (Web Page)

    Saw Tip Configurations (also Styles or Grinds) The overall shape of a saw tip is called the "grind" because it is ground in after the tip is put on the saw body.      FTG ( ...

  • Cracked Saw Tips on a Finished Saw Blade (Web Page)

    A customer wrote to us for an analysis on cracked saw tips on a finished saw blade.  We gave our analysis based on what we saw from the saw tips they sent us.  For more information on when ...

  • Privacy Policy (Web Page)

    Quick version: We will not do anything with your information without your explicit permission.  This privacy notice discloses the privacy practices for www.Carbideprocessors.com. This privacy ...

  • Saw Tips in Oven Cleaner (Web Page)

    Executive Summary:  No effect was found on the carbide or the braze alloy.  Oven cleaner does remove any paint and the expensive plastic coatings which may be the best reason not to use it.

  • CSM Top Grinding (Web Page)

    This operation must be done with a good solid index finger that does not spring when the tooth is forced against it.  If the finger springs or moves differently each time a tooth is ground, the ...

  • Router Bits (Web Page)

    //   Learn about choosing, using and inspecting a router bit for peak performance. Table of Contents: How to Use a Router Bit Bearing Basic Router Bit Profiles Rou ...

  • Brazing Process (Web Page)

    Definitions Brazing is the joining of two dissimilar materials using a third material.  brazing alloying and brazing are the same thing except the brazing alloying takes place below 840 F and b ...

  • Filter Units (Web Page)

    Machine Coolant Filtration Units These are examples of our standard designs below, but remember, we are scientists and engineers and love to build custom units as well.  We would love to build ...

  • How Carbide Wears (Web Page)

    Carbide Wear From the book Building Superior Brazed Tools    Buy the Book   Typically people think that carbide is worn away.  There are other considerations that are ...

  • Chipping Tungsten Carbide (Web Page)

     From the book Building Superior Brazed Tools    Buy the Book   During the production of Tungsten Carbide the material goes through a "green state" where it has the strengt ...

  • Saw Noise (Web Page)

    by Lowell Freeborn The information for this article was taken from Lowell Freeborn's "Carbide Saw Manuel."  There are many more great articles based on the information in his book in our&n ...



Your search for "sogjavascript:void(0)/? _=1" did not match any news or information.

Suggestions:

  • Make sure all words are spelled correctly.
  • Try different keywords.
  • Try more general keywords.