Bing
Ajax  Loading... Please wait...

Popular Brands

Our Newsletter

  • Pages:
  • 1
  • 2
  • 3
  • Calculating the Amount of Brazing Alloy to use (Web Page)

    Braze joints are strongest at about 0.0005” (1/2 of one –thousandth of an inch) but this is not a good standard for two main reasons: As the braze joint gets thicker it provides signi ...

  • Tungsten Carbide Grades (Web Page)

    From the book Building Superior Brazed Tools  Buy the Book  There is no comprehensive comparison of tungsten carbide between and among tungsten carbide suppliers.  A big part of the p ...

  • Quality Specifications for Saw Tips (Web Page)

    Quality Specifications for Tungsten Carbide Saw Tips  From the book Building Superior Brazed Tools    Buy the Book Counts 1.  All counts will be – zero to +2 ...

  • Tungsten Carbide Tips (Web Page)

    Save on Carbide Saw Tips, Stump grinder Teeth and STB blanks. Choose from many different sizes and grades or get a quote for a custom.   Click here to check out our online sel ...

  • Chipping Tungsten Carbide (Web Page)

     From the book Building Superior Brazed Tools    Buy the Book   During the production of Tungsten Carbide the material goes through a "green state" where it has the strengt ...

  • How Carbide Powder is Pressed (Web Page)

    Tungsten carbide shapes are made from a powder which is typically tungsten, carbon, cobalt and wax to bind it all together.  Carbide shapes are made three ways; pressing in a die, ”whitt ...

  • Grinding-Health and Safety continued (Web Page)

    Return to previous page  Controlling Exposure By Filtering Coolant Grinding Coolant Analysis (particles per cubic centimeter)   Shop 1 Shop 2     ...

  • Effectiveness of Machine Coolant Filtration Systems (Web Page)

    The concept is to build extremely efficient units that sell for as little as possible.  We have done our best to design sturdy and reliable filter units that work well and cost less.  For ...

  • Filtered Coolant and Unfiltered Coolant Compared (Web Page)

    Filtered & Unfiltered Sumps  Nothing speaks the truth like real data and numbers.  You can see here from our testing and analysis the difference that filtering can make.  Filterin ...

  • Filtering Carbide Grinding Coolant (Web Page)

    The grinding of carbide tools is actually an extrusion process.  Little chunks of the tungsten carbide and the cobalt binder are pulled from the carbide tool tip.  These chunks form sludge ...

  • Types of Filters for Filter Units (Web Page)

    There are several types of filters for machine Coolant Filtration.  The infomration below can help you decide which type of filter might work best for your chosen coolant management program.&nbs ...

  • Machine Coolant MSDS (Web Page)

     Material Safety Data Sheet  (There are a lot of really bad MSDS sheets.  If you are a manager you need an MSDS sheet that will protect you and your employees from hazards and that wi ...

  • Machine Coolant Testing Instruments (Web Page)

    All You Need for Monthly Machine Coolant Tests  It is important to frequently test machine coolant so that you are aware of dangeraous bacteria growth, changes in pH levels that may p ...

  • Tramp Oil (Web Page)

    Machine Coolant and Tramp Oil   Tramp Oils are a huge problem.  Skimmers work but only on about half of tramp oils.  We took a sample of coolant and let it settle out. &nbs ...

  • Saw Blade Inspection Equipment (Web Page)

    Refer back to the Saw Blade Index for more articles on Saw Blades, or shop for Saw Blades in our store.   Back Clearance Angle   Precision protractor ...

  • Bandsaw Blade Brazing (Web Page)

      Bandsaw (Band Saw) Blade Brazing   Clean and bevel the blade ends  Clamp blade ends to the fixture Spread the flux Braze Anneal Remove excess alloy Size of Blade With a ...

  • CSM Triple Chip Style (Web Page)

    SERVICE SPECIFICATIONS: Hook varies from 0° for metal & plastic to 25° for rip saws. Top Geometry (See Triple Chip Chart) Sides 2° & 3° for most saws, And 1/2° for gl ...

  • CSM Locked In Tooth Style (Web Page)

    SERVICE SPECIFICATIONS: Hook 0° for metal & plastics to 15° for wood styles. Made in T. C. G., A. T. B., and Chip Breaker Styles. Sides Generally 1° & 2°. USE: Locking ...

  • Clamp - Jig - Fixture (Web Page)

  • Common Saw Blades and their Uses (Web Page)

    There are many different types of saw blades for many different types of applications.  Choosing the right saw blade for your specific application can seem daunting.  Here is a guide for ch ...


  • Pages:
  • 1
  • 2
  • 3

Your search for "clamp manufacturing cojavascript:void(0)/" did not match any news or information.

Suggestions:

  • Make sure all words are spelled correctly.
  • Try different keywords.
  • Try more general keywords.