Shop by Price

Bearings

Ball Bearings - Whiteside

Outside Diameter	Inside Diameter	Application	Part Number
1/4"	1/8"		B1A
3/8"	1/8"		B1
3/8"	3/16"		B2
1/2"	3/16"	Standard	B3
1/2"	3/16"	100 pcs. bulk	B3BLK
1/2"	3/16"	Non-Mar Nylon Sleeve	B3S
1/2"	3/16"	Euro-Square	B3SQ
1/2"	3/16"	Teflon® Shields	B3T
.490"	3/16"	for resharps (undersize)	B3U
3/4"	1/4"		B4
7/8"	5/16"		B5
5/8"	1/4"		B6
5/8"	3/16"		B7
3/4"	3/16"		B8
3/4"	3/16"	Euro-Square	B8SQ
1/2"	1/4"		B9
.490"	1/4"	for resharps (undersize)	B9U
1 1/8"	1/2"		B11
7/8"	3/8"		B12
11/16"	3/16"		B14
13/16"	3/16"		B15
1 1/4"	1/2"		B16
1 3/8"	1/2"		B17
1 1/2"	1/2"		B18
3/4"	1/2"		B19
3/4"	5/16"		B20
7/8"	1/4"		B21
1 7/8"	1/2"		B24
1 1/8"	5/16"		B25
1 3/8"	5/16"		B26
5/8"	5/16"		B27
7/8"	3/16"		B28
1"	3/16"		B29
7/8" x 10°	3/16"	Non-Mar Nylon Sleeve	BB300

Bearing Lock Collars

Retaining Collars used when bearings are added to the shanks of router bits for following templates.

Shank Diameter	Outside Diameter	Part Number
1/4"	7/16"	LC-1/4
1/2"	11/16"	LC-1/2

Uses part # HK-1/16 Hex Key Wrench

#LCS-Replacement Set Screw for Lock Collars

BB501 - 5 Piece Bearing Conversion Kit

Use this kit to vary the horizontal cutting depth of router bits with bearing pilots.

Great for stepping in to finish depth by controlled increments.

Contains B2 (3/8"), B3 (1/2"), B7 (5/8"), B8 (3/4") Bearings and 3/32" Hex Key Wrench

BB600 - General Bearing Repair Kit

This handy kit inludes spare bearings, screws, and wrench to replace bearings on most bits.

Includes five B3 (1/2 x 3/16) and two B2 (3/8 x 3/16) bearings, ten 54025S Screws, and a 3/32 Hex Key Wrench.

BB701 - Accessory Kit

Great for replacement bearings and screws - Plus this generous bearing assortment allows you to vary your cutting depths and change your profiles. Also contains lock collars and bearings for adding bearing guides to the shanks of your standard bits for following templates.

Contains: 12 bearings — four B3 (1/2 x 3/16), one each of B2 (3/8 x 3/16), B7 (5/8 x 3/16), B8 (3/4 x 3/16), B9 (1/2x 1/4), B6 (5/8 x 1/4), B4 (3/4 x 1/4), B5 (7/8 x 5/16) and B11 (1 1/8 x 1/2);two each 1/4" lock collars (LC-1/4) and 1/2" lock collars (LC-1/2);one each 1/16, 5/64, 3/32 and 5/32 Hex Key wrenches; plus ten 54025S bearing screws.