Bing
Ajax  Loading... Please wait...

Our Newsletter

Sort by:

Melamine and Veneer Plywood

tenryu_melamine_veneer.jpg.jpg

Tenryu MEL-PRO Saw Blades

The Ultimate Melamine and Veneer-Faced Plywood Cutting Blade

The Mel-Pro Series is a complete line of blades that solve problems associated with cutting melamine and other laminated wood products. Additionally, veneer-faced plywood can be cut without splintering at more reasonable feed speeds than in the past.

FINER CUTS- Precision ground carbide teeth set on hand-tensioned tool steel bodies produce finer cuts without chipping and "bottom-side blowout".

QUIETER- Patented resin bond-filled expansion slots effectively absorb vibration and reduce noise.

LONGER LIFE- High-grade, extra-hard, micro-grain, anti-corrosive carbide teeth fight both chemical and abrasive wear to remain sharp longer. There are a lot of blades on the market that can cut melamine but only one can really cut it chip free, quieter, easier and longer - the TENRYU Mel-Pro.

Numerous requests for a better melamine blade prompted Tenryu to spend over a year of research and development to bring you the world's most advanced melamine cutting blade. The Mel-Pro features a fully hardened, expertly tensioned tool steel body that absorbs impact, remains flat and true, and resists excess heat buildup. The Mel-Pro's exclusive, red bond, resin filled expansion slots absorb vibration, reduce heat and permit the blade to run quieter than any other brand. The thin-kerf, mirror-like grind on super hard, specially designed carbide tips allow for lighter cuts and reduce friction heat buildup. The bottom line is your bottom line will look better when you reduce scrap, reduce sharpening costs and reduce noise in your shop with Mel-Pro blades.

 

Place your order for Tenryu Saw Blades before 2:30pm ET Mon-Fri to have your order ship same Day
Orders placed after 2:30pm ET and orders placed on weekends or holidays will ship on the next business day

 

Mel-Pro Series

MODEL #DIA.TEETHARBORGRINDKERFRAKEAPPLICATION
ML-25580AB 10" 80 5/8" ATAFR .118" 0 Mel-Pro. Use this blade for cutting melamine and laminated wood Materials and veneer-faced plywood.
ML-255100AB 10" 100 5/8" ATAFR .118" 0 For cutting thin stock melamine, laminated wood and veneers.
ML-305100AB 12" 100 1" ATAFR .126" 0 For cutting melamine and other laminated wood based materials.
ML-305120AB 12" 120 1" ATAFR .126" 0 Super-fine cuts in thin stock melamine and other laminated woods.
ML-355120AB 14" 120 1" ATAFR .126" 0 For cutting melamine and laminated woods. Super clean cuts.

 

Hi-ATB Melamine and Veneer Plywood Cutting Blade

EACH BLADE FEATURES:

  • Hi-ATB design with negative (-5) rake angle tooth geometry - NO TEAR OUT!
  • Traditional full-kerf, "European Style" blade design.
  • C-4 hardness, super fine grain, anti-corrosive carbide tips for the keenest edges and extended sharp life.

PREMIUM, INDUSTRIAL HI-ATB FEATURES:

  • Specially developed, top-grade, super fine grain carbide tip.
  • NEW: Additional, "resin-filled, laser cut body slots" succeed in vibration dampening to an even greater extent.
  • Exhaustive, hand-hammer plate tensioning assures truer and smoother cuts.
  • Longer Lasting than our competitor's or our economy series.

Hi-ATB Series

MODEL #DIA.TEETHARBORGRINDKERFRAKEAPPLICATION
ML-21060H 8-1/4" 60 5/8" HATB .118" -5 Premium Hi-ATB Mel-Pro designed for 8-1/4" table saws.
ML-25580H 10" 80 5/8" HATB .118" -5 For super-smooth cuts in melamine, laminated wood composites & veneer plywood.
ML-255100H 10" 100 5/8" HATB .118" -5 Especially effective for cutting thinner stock of above material.
ML-30580H 12" 80 1" HATB .126" -5 For super-smooth cuts in melamine, laminated woood composites & veneer plywood.
ML-305100H 12" 100 1" HATB .126" -5 Especially effective for cutting thinner stock of above materials.
ML-355100H 14" 100 1" HATB .126" -5 For supersmooth cuts in melamine, laminated wood composites & veneer plywood.

**Click here for grind definitions


b2b lead generation