<![CDATA[Carbide Processors: New Products - 5700 - 1 Edge O Flute Downcut Spiral]]>

<![CDATA[Carbide Processors: New Products - 5700 - 1 Edge O Flute Downcut Spiral]]> https://carbideprocessors.com Thu, 18 Jun 2026 00:32:10 +0000 <![CDATA[LH O-Flute Downcut Bit, 1 Flute, 1/8 Dia, 1/2 Cut Length, 1/4 Shank, Vortex 5710L]]> https://carbideprocessors.com/lh-o-flute-downcut-bit-1-flute-1-8-dia-1-2-cut-length-1-4-shank-vortex-5710l/ Fri, 09 Mar 2012 09:59:49 +0000 https://carbideprocessors.com/lh-o-flute-downcut-bit-1-flute-1-8-dia-1-2-cut-length-1-4-shank-vortex-5710l/

Vortex Series 5700 - Single Edge "0" Flute Downcut Spiral - Vortex 5710L

O Flute, Downcut, Spiral Router Bits - (1 Flute) Left Hand, Solid Carbide - Vortex 5710L.
Cutting Edge Diameter 1/8", Cutting Edge Length 1/2", Shank Diameter 1/4", Overall Length 2".

These router bits provide good clean cuts in hard plastics while allowing the choice of downward ch..

Price: $43.07

]]>

Vortex Series 5700 - Single Edge "0" Flute Downcut Spiral - Vortex 5710L

O Flute, Downcut, Spiral Router Bits - (1 Flute) Left Hand, Solid Carbide - Vortex 5710L.
Cutting Edge Diameter 1/8", Cutting Edge Length 1/2", Shank Diameter 1/4", Overall Length 2".

These router bits provide good clean cuts in hard plastics while allowing the choice of downward ch..

Price: $43.07

]]> O Flute, Downcut, Spiral Router Bits - (1 Flute) Left Hand, Solid Carbide - Vortex 5710L.
Cutting Edge Diameter 1/8", Cutting Edge Length 1/2", Shank Diameter 1/4", Overall Length 2".

These router bits provide good clean cuts in hard plastics while allowing the choice of downward ch..]]> <![CDATA[O-Flute Downcut Bit, 1 Flute, 10mm Dia, 30mm Cut Length, 10mm Shank, Vortex 5790]]> https://carbideprocessors.com/o-flute-downcut-bit-1-flute-10mm-dia-30mm-cut-length-10mm-shank-vortex-5790/ Thu, 10 Feb 2011 15:22:33 +0000 https://carbideprocessors.com/o-flute-downcut-bit-1-flute-10mm-dia-30mm-cut-length-10mm-shank-vortex-5790/

O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5790.
Cutting Edge Diameter 10mm, Cutting Edge Length 30mm, Shank Diameter 10mm, Overall Length 76mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal..

Price: $69.15

]]>

Vortex Series 5700 - Single Edge "0" Flute Downcut Spiral - Vortex 5790

O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5790.
Cutting Edge Diameter 10mm, Cutting Edge Length 30mm, Shank Diameter 10mm, Overall Length 76mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal..

Price: $69.15

]]> O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5790.
Cutting Edge Diameter 10mm, Cutting Edge Length 30mm, Shank Diameter 10mm, Overall Length 76mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal..]]> <![CDATA[O-Flute Downcut Bit, 1 Flute, 8mm Dia, 25mm Cut Length, 8mm Shank, Vortex 5785]]> https://carbideprocessors.com/o-flute-downcut-bit-1-flute-8mm-dia-25mm-cut-length-8mm-shank-vortex-5785/ Thu, 10 Feb 2011 15:22:33 +0000 https://carbideprocessors.com/o-flute-downcut-bit-1-flute-8mm-dia-25mm-cut-length-8mm-shank-vortex-5785/

O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5785.
Cutting Edge Diameter 8mm, Cutting Edge Length 25mm, Shank Diameter 8mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal w..

Price: $54.37

]]>

Vortex Series 5700 - Single Edge "0" Flute Downcut Spiral - Vortex 5785

O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5785.
Cutting Edge Diameter 8mm, Cutting Edge Length 25mm, Shank Diameter 8mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal w..

Price: $54.37

]]> O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5785.
Cutting Edge Diameter 8mm, Cutting Edge Length 25mm, Shank Diameter 8mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal w..]]> <![CDATA[O-Flute Downcut Bit, 1 Flute, 6mm Dia, 25mm Cut Length, 6mm Shank, Vortex 5780]]> https://carbideprocessors.com/o-flute-downcut-bit-1-flute-6mm-dia-25mm-cut-length-6mm-shank-vortex-5780/ Thu, 10 Feb 2011 15:22:33 +0000 https://carbideprocessors.com/o-flute-downcut-bit-1-flute-6mm-dia-25mm-cut-length-6mm-shank-vortex-5780/

O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5780.
Cutting Edge Diameter 6mm, Cutting Edge Length 25mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal w..

Price: $37.50

]]>

Vortex Series 5700 - Single Edge "0" Flute Downcut Spiral - Vortex 5780

O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5780.
Cutting Edge Diameter 6mm, Cutting Edge Length 25mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal w..

Price: $37.50

]]> O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5780.
Cutting Edge Diameter 6mm, Cutting Edge Length 25mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal w..]]> <![CDATA[O-Flute Downcut Bit, 1 Flute, 5mm Dia, 16mm Cut Length, 6mm Shank, Vortex 5775]]> https://carbideprocessors.com/o-flute-downcut-bit-1-flute-5mm-dia-16mm-cut-length-6mm-shank-vortex-5775/ Thu, 10 Feb 2011 15:22:33 +0000 https://carbideprocessors.com/o-flute-downcut-bit-1-flute-5mm-dia-16mm-cut-length-6mm-shank-vortex-5775/

O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5775.
Cutting Edge Diameter 5mm, Cutting Edge Length 16mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal w..

Price: $35.23

]]>

Vortex Series 5700 - Single Edge "0" Flute Downcut Spiral - Vortex 5775

O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5775.
Cutting Edge Diameter 5mm, Cutting Edge Length 16mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal w..

Price: $35.23

]]> O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5775.
Cutting Edge Diameter 5mm, Cutting Edge Length 16mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal w..]]> <![CDATA[O-Flute Downcut Bit, 1 Flute, 5mm Dia, 8mm Cut Length, 6mm Shank, Vortex 5772]]> https://carbideprocessors.com/o-flute-downcut-bit-1-flute-5mm-dia-8mm-cut-length-6mm-shank-vortex-5772/ Thu, 10 Feb 2011 15:22:33 +0000 https://carbideprocessors.com/o-flute-downcut-bit-1-flute-5mm-dia-8mm-cut-length-6mm-shank-vortex-5772/

O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5772.
Cutting Edge Diameter 5mm, Cutting Edge Length 8mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal wh..

Price: $35.23

]]>

Vortex Series 5700 - Single Edge "0" Flute Downcut Spiral - Vortex 5772

O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5772.
Cutting Edge Diameter 5mm, Cutting Edge Length 8mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal wh..

Price: $35.23

]]> O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5772.
Cutting Edge Diameter 5mm, Cutting Edge Length 8mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal wh..]]> <![CDATA[O-Flute Downcut Bit, 1 Flute, 4mm Dia, 16mm Cut Length, 6mm Shank, Vortex 5770]]> https://carbideprocessors.com/o-flute-downcut-bit-1-flute-4mm-dia-16mm-cut-length-6mm-shank-vortex-5770/ Thu, 10 Feb 2011 15:22:33 +0000 https://carbideprocessors.com/o-flute-downcut-bit-1-flute-4mm-dia-16mm-cut-length-6mm-shank-vortex-5770/

O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5770.
Cutting Edge Diameter 4mm, Cutting Edge Length 16mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal w..

Price: $37.50

]]>

Vortex Series 5700 - Single Edge "0" Flute Downcut Spiral - Vortex 5770

O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5770.
Cutting Edge Diameter 4mm, Cutting Edge Length 16mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal w..

Price: $37.50

]]> O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5770.
Cutting Edge Diameter 4mm, Cutting Edge Length 16mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal w..]]> <![CDATA[O-Flute Downcut Bit, 1 Flute, 4mm Dia, 8mm Cut Length, 6mm Shank, Vortex 5768]]> https://carbideprocessors.com/o-flute-downcut-bit-1-flute-4mm-dia-8mm-cut-length-6mm-shank-vortex-5768/ Thu, 10 Feb 2011 15:22:32 +0000 https://carbideprocessors.com/o-flute-downcut-bit-1-flute-4mm-dia-8mm-cut-length-6mm-shank-vortex-5768/

O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5768.
Cutting Edge Diameter 4mm, Cutting Edge Length 8mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal wh..

Price: $35.23

]]>

Vortex Series 5700 - Single Edge "0" Flute Downcut Spiral - Vortex 5768

O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5768.
Cutting Edge Diameter 4mm, Cutting Edge Length 8mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal wh..

Price: $35.23

]]> O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5768.
Cutting Edge Diameter 4mm, Cutting Edge Length 8mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal wh..]]> <![CDATA[O-Flute Downcut Bit, 1 Flute, 3mm Dia, 12mm Cut Length, 6mm Shank, Vortex 5763]]> https://carbideprocessors.com/o-flute-downcut-bit-1-flute-3mm-dia-12mm-cut-length-6mm-shank-vortex-5763/ Thu, 10 Feb 2011 15:22:32 +0000 https://carbideprocessors.com/o-flute-downcut-bit-1-flute-3mm-dia-12mm-cut-length-6mm-shank-vortex-5763/

O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5763.
Cutting Edge Diameter 3mm, Cutting Edge Length 12mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal w..

Price: $37.40

]]>

Vortex Series 5700 - Single Edge "0" Flute Downcut Spiral - Vortex 5763

O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5763.
Cutting Edge Diameter 3mm, Cutting Edge Length 12mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal w..

Price: $37.40

]]> O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5763.
Cutting Edge Diameter 3mm, Cutting Edge Length 12mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal w..]]> <![CDATA[O-Flute Downcut Bit, 1 Flute, 3mm Dia, 8mm Cut Length, 6mm Shank, Vortex 5760]]> https://carbideprocessors.com/o-flute-downcut-bit-1-flute-3mm-dia-8mm-cut-length-6mm-shank-vortex-5760/ Thu, 10 Feb 2011 15:22:32 +0000 https://carbideprocessors.com/o-flute-downcut-bit-1-flute-3mm-dia-8mm-cut-length-6mm-shank-vortex-5760/

O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5760.
Cutting Edge Diameter 3mm, Cutting Edge Length 8mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal wh..

Price: $37.40

]]>

Vortex Series 5700 - Single Edge "0" Flute Downcut Spiral - Vortex 5760

O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5760.
Cutting Edge Diameter 3mm, Cutting Edge Length 8mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal wh..

Price: $37.40

]]> O Flute, Downcut, Spiral Router Bits - (1 Flute) Solid Carbide - Vortex 5760.
Cutting Edge Diameter 3mm, Cutting Edge Length 8mm, Shank Diameter 6mm, Overall Length 64mm.

These router bits provide good clean cuts in hard plastics while allowing the choice of downward chip removal wh..]]>