<![CDATA[Carbide Processors: New Products - Face Inlay Bits]]> https://carbideprocessors.com Wed, 17 Jun 2026 03:06:30 +0000 <![CDATA[Face Inlay Bit, 3/4 Cut Length, 3/16 Cut Depth, 1/2" Shank, Southeast Tool SE2914]]> https://carbideprocessors.com/face-inlay-bit-3-4-cut-length-3-16-cut-depth-1-2-shank-southeast-tool-se2914/ Thu, 17 Dec 2009 15:35:18 +0000 https://carbideprocessors.com/face-inlay-bit-3-4-cut-length-3-16-cut-depth-1-2-shank-southeast-tool-se2914/ Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2914

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2914; 7/8 Cutting diameter, 3/4 Cutting length, 3/16 Cut depth. Uses SBE145 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..

Price: $39.36

]]> Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2914

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2914; 7/8 Cutting diameter, 3/4 Cutting length, 3/16 Cut depth. Uses SBE145 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..

Price: $39.36

]]> Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2914; 7/8 Cutting diameter, 3/4 Cutting length, 3/16 Cut depth. Uses SBE145 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..]]> <![CDATA[Face Inlay Bit, 3/4 Cut Length, 1/8 Cut Depth, 1/2" Shank, Southeast Tool SE2913]]> https://carbideprocessors.com/face-inlay-bit-3-4-cut-length-1-8-cut-depth-1-2-shank-southeast-tool-se2913/ Thu, 17 Dec 2009 15:35:18 +0000 https://carbideprocessors.com/face-inlay-bit-3-4-cut-length-1-8-cut-depth-1-2-shank-southeast-tool-se2913/ Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2913

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2913; 7/8 Cutting diameter, 3/4 Cutting length, 1/8 Cut depth. Uses SBE130 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the actu..

Price: $40.68

]]> Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2913

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2913; 7/8 Cutting diameter, 3/4 Cutting length, 1/8 Cut depth. Uses SBE130 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the actu..

Price: $40.68

]]> Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2913; 7/8 Cutting diameter, 3/4 Cutting length, 1/8 Cut depth. Uses SBE130 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the actu..]]> <![CDATA[Face Inlay Bit, 3/4 Cut Length, 1/16 Cut Depth, 1/2" Shank, Southeast Tool SE2912]]> https://carbideprocessors.com/face-inlay-bit-3-4-cut-length-1-16-cut-depth-1-2-shank-southeast-tool-se2912/ Thu, 17 Dec 2009 15:35:18 +0000 https://carbideprocessors.com/face-inlay-bit-3-4-cut-length-1-16-cut-depth-1-2-shank-southeast-tool-se2912/ Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2912

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2912; 7/8 Cutting diameter, 3/4 Cutting length, 1/16 Cut depth. Uses SBE120 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..

Price: $41.04

]]> Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2912

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2912; 7/8 Cutting diameter, 3/4 Cutting length, 1/16 Cut depth. Uses SBE120 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..

Price: $41.04

]]> Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2912; 7/8 Cutting diameter, 3/4 Cutting length, 1/16 Cut depth. Uses SBE120 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..]]> <![CDATA[Face Inlay Bit, 3/8 Cut Length, 3/16 Cut Depth, 1/2" Shank, Southeast Tool SE2911]]> https://carbideprocessors.com/face-inlay-bit-3-8-cut-length-3-16-cut-depth-1-2-shank-southeast-tool-se2911/ Thu, 17 Dec 2009 15:35:18 +0000 https://carbideprocessors.com/face-inlay-bit-3-8-cut-length-3-16-cut-depth-1-2-shank-southeast-tool-se2911/ Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2911

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2911; 7/8 Cutting diameter, 3/8 Cutting length, 3/16 Cut depth. Uses SBE145 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..

Price: $36.64

]]> Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2911

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2911; 7/8 Cutting diameter, 3/8 Cutting length, 3/16 Cut depth. Uses SBE145 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..

Price: $36.64

]]> Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2911; 7/8 Cutting diameter, 3/8 Cutting length, 3/16 Cut depth. Uses SBE145 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..]]> <![CDATA[Face Inlay Bit, 3/8 Cut Length, 1/8 Cut Depth, 1/2" Shank, Southeast Tool SE2910]]> https://carbideprocessors.com/face-inlay-bit-3-8-cut-length-1-8-cut-depth-1-2-shank-southeast-tool-se2910/ Thu, 17 Dec 2009 15:35:18 +0000 https://carbideprocessors.com/face-inlay-bit-3-8-cut-length-1-8-cut-depth-1-2-shank-southeast-tool-se2910/ Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2910

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2910; 7/8 Cutting diameter, 3/8 Cutting length, 1/8 Cut depth. Uses SBE130 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the actu..

Price: $35.52

]]> Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2910

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2910; 7/8 Cutting diameter, 3/8 Cutting length, 1/8 Cut depth. Uses SBE130 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the actu..

Price: $35.52

]]> Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2910; 7/8 Cutting diameter, 3/8 Cutting length, 1/8 Cut depth. Uses SBE130 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the actu..]]> <![CDATA[Face Inlay Bit, 3/8 Cut Length, 1/16 Cut Depth, 1/2" Shank, Southeast Tool SE2909]]> https://carbideprocessors.com/face-inlay-bit-3-8-cut-length-1-16-cut-depth-1-2-shank-southeast-tool-se2909/ Thu, 17 Dec 2009 15:35:18 +0000 https://carbideprocessors.com/face-inlay-bit-3-8-cut-length-1-16-cut-depth-1-2-shank-southeast-tool-se2909/ Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2909

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2909; 7/8 Cutting diameter, 3/8 Cutting length, 1/16 Cut depth. Uses SBE120 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..

Price: $35.57

]]> Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2909

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2909; 7/8 Cutting diameter, 3/8 Cutting length, 1/16 Cut depth. Uses SBE120 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..

Price: $35.57

]]> Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2909; 7/8 Cutting diameter, 3/8 Cutting length, 1/16 Cut depth. Uses SBE120 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..]]> <![CDATA[Face Inlay Bit, 1/8 Cut Length, 3/16 Cut Depth, 1/2" Shank, Southeast Tool SE2908]]> https://carbideprocessors.com/face-inlay-bit-1-8-cut-length-3-16-cut-depth-1-2-shank-southeast-tool-se2908/ Thu, 17 Dec 2009 15:35:18 +0000 https://carbideprocessors.com/face-inlay-bit-1-8-cut-length-3-16-cut-depth-1-2-shank-southeast-tool-se2908/ Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2908

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2908; 7/8 Cutting diameter, 1/8 Cutting length, 3/16 Cut depth. Uses SBE145 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..

Price: $35.73

]]> Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2908

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2908; 7/8 Cutting diameter, 1/8 Cutting length, 3/16 Cut depth. Uses SBE145 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..

Price: $35.73

]]> Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2908; 7/8 Cutting diameter, 1/8 Cutting length, 3/16 Cut depth. Uses SBE145 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..]]> <![CDATA[Face Inlay Bit, 1/8 Cut Length, 1/8 Cut Depth, 1/2" Shank, Southeast Tool SE2907]]> https://carbideprocessors.com/face-inlay-bit-1-8-cut-length-1-8-cut-depth-1-2-shank-southeast-tool-se2907/ Thu, 17 Dec 2009 15:35:18 +0000 https://carbideprocessors.com/face-inlay-bit-1-8-cut-length-1-8-cut-depth-1-2-shank-southeast-tool-se2907/ Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2907

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2907; 7/8 Cutting diameter, 1/8 Cutting length, 1/8 Cut depth. Uses SBE130 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the actu..

Price: $35.73

]]> Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2907

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2907; 7/8 Cutting diameter, 1/8 Cutting length, 1/8 Cut depth. Uses SBE130 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the actu..

Price: $35.73

]]> Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2907; 7/8 Cutting diameter, 1/8 Cutting length, 1/8 Cut depth. Uses SBE130 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the actu..]]> <![CDATA[Face Inlay Bit, 1/8 Cut Length, 1/16 Cut Depth, 1/2" Shank, Southeast Tool SE2906]]> https://carbideprocessors.com/face-inlay-bit-1-8-cut-length-1-16-cut-depth-1-2-shank-southeast-tool-se2906/ Thu, 17 Dec 2009 15:35:18 +0000 https://carbideprocessors.com/face-inlay-bit-1-8-cut-length-1-16-cut-depth-1-2-shank-southeast-tool-se2906/ Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2906

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2906; 7/8 Cutting diameter, 1/8 Cutting length, 1/16 Cut depth. Uses SBE120 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..

Price: $35.73

]]> Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2906

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2906; 7/8 Cutting diameter, 1/8 Cutting length, 1/16 Cut depth. Uses SBE120 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..

Price: $35.73

]]> Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2906; 7/8 Cutting diameter, 1/8 Cutting length, 1/16 Cut depth. Uses SBE120 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..]]> <![CDATA[Face Inlay Bit, 1/2 Cut Length, 3/16 Cut Depth, 1/2" Shank, Southeast Tool SE2905]]> https://carbideprocessors.com/face-inlay-bit-1-2-cut-length-3-16-cut-depth-1-2-shank-southeast-tool-se2905/ Thu, 17 Dec 2009 15:35:18 +0000 https://carbideprocessors.com/face-inlay-bit-1-2-cut-length-3-16-cut-depth-1-2-shank-southeast-tool-se2905/ Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2905

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2905; 7/8 Cutting diameter, 1/2 Cutting length, 3/16 Cut depth. Uses SBE145 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..

Price: $35.71

]]> Face Inlay Router Bits for Solid Surface - Southeast Tool - Southeast Tool SE2905

Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2905; 7/8 Cutting diameter, 1/2 Cutting length, 3/16 Cut depth. Uses SBE145 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..

Price: $35.71

]]> Face Inlay Router Bits for Solid Surface - 1/2 Shank, Carbide Tipped - Southeast Tool SE2905; 7/8 Cutting diameter, 1/2 Cutting length, 3/16 Cut depth. Uses SBE145 bearing.

*Please note that the above picture is a representation of the type of tool and may not accurately represent the act..]]>