The 27in x 43in Router Table is the most popular of Incra's router tables, and you'll see why as soon as you use it - lots of room to work on top, lots potential storage space between the widely spaced legs. The LS17 Standard System features 17in of fence travel and is good for those who already own a shaper or have a second router table dedicated to general shaping work. The Standard Systems can be upgraded to Super Systems by adding the Wonder Fence at a later date, if you're on a budget.

Router Table Combo #2 includes the LS17 Standard System, but the combo can be upgraded to the extra fence travel of the LS 25 Standard System for an additional amount. The LS 17's locking base housing is cleanly mounted within the perimeter of the 27"in x 43in router table, and the locking base housing of the LS25 Standard System overhangs the end of the table about 5in when set up for full fence travel.

INCRA Router Fence & Table Combo #2 Consists of:

• INCRA LS Positioner 17in - The LS Positioner offers rock-solid fence travel of 17in. Lifting the red locking lever causes the patented steel lead screw positioning system to instantly snap the fence to the dead center of any multiple of 1/32in with an accuracy of 0.002in. This allows fence positioning far beyond what's possible by eyesight alone, and fence setups are instantly repeatable. The integrated micro adjust knob allows moving between whole increments with 0.001in resolution for total control over small fence adjustments.

• 28in Pro II Fence - The Pro-II joinery fence is an updated, beefed-up version of the earlier Pro-28 Fence and allows INCRA Jig Ultra positioners to be fitted with the new, super-adjustable Wonder Fence. The extrusion is wider than the original, the face has been machined flat, and the T-slot accepts the larger hardware required by the Wonder Fence. Patented Incremental racks are installed on the rear of the fence for complete compatibility with our ShopStop and Incra Stop, and the fence directly accepts the Jumbo Right Angle fixture. A heavy duty 13in stop extender bar telescopes from either end of the fence to stop cuts on longer boards.

• INCRA Shop Stop - Instead of the basic stop block of typical router fences, the included INCRA Shop Stop is based on their patented incremental positioning racks to give you unparalleled accuracy and repeatability when limiting a board's travel across the router bit or setting the endpoints of stopped grooves for drawer and box bottoms.

• Right Angle Fixture - Incra's largest Right Angle Fixture is included to keep workpieces square to the fence and square to the table for joinery operations.

• 27in x 43in Offset Router Table Top - All of INCRA's new lineup of heavy duty router table tops feature a 1-1/4in MDF substrate with a high pressure horizontal grade phenolic laminate top and bottom. With a total thickness of 1-3/8in, these tops are designed to support even the heaviest of production routers and lifts, and will work with any standard  9-1/4in x 11-3/4in mounting plate.
  Rather than the typical router plate leveling set screws that dig into the table's recess requiring constant re-adjustment, Incra's plate leveling system puts flat head levelers in the table, not in the router mounting plate. Access to these levelers is through the 10 access holes located around the perimeter of the mounting plate. Just insert the hex key in the access holes and turn to adjust. After leveling, a simple quarter turn of the corner mounted Cam-Lock securely holds the plate in the router table's recess.

• MagnaLOCK Router Plate - All INCRA Router Tables are shipped with a 3/8in solid aluminum router mounting plate, pre-drilled for your router, featuring the exclusive Magna-Lock magnetic throat plate system. Changing any of the included throat plates is a snap with the Magna Lock System.

• 3 MagnaLOCK Ring Inserts (1in, 2-1/8in & 3-5/8in) -  Just drop in the selected plate. The high energy, rare-earth magnets hold the plate secure and perfectly flush every time. All of Incra's mounting plates include 3 laser cut throat plates with a 1in, 2-1/8in and 3-5/8in opening.

• 43in Router Table Stand - Constructed of hard anodized aluminum and "armor plated" powder coat heavy gauge steel for years of durable performance in your workshop.
  T-Slotted Aluminum legs permit easy assembly and allow for positioning of the optional shelf supports at any height. Great for creating a shelf at a comfortable level. Non-skid leg levelers for vertical height adjustability from 34-1/2in to 36-1/2in. Need a cabinet for your router station? No problem with Incra's innovative leg design. Just slide 1/2in panels into the channel on each leg to easily enclose the stand. Create the ultimate dust collection enclosure in minutes.

• Master Reference Guide with 51-piece (imperial) Template Library - The Master Reference Guide provides straightforward instructions and 51 joinery templates to slide into the positioner to provide a visual reference for each joint pattern.Those templates can produce a mind-boggling variety of joints - 11 box joint patterns and 29 dovetail patterns are included , and each one of the dovetail patterns can be cut half blind, through, sliding, or corner post.

• 82-Minute Instructional LS Positioner DVD - This great disc is loaded with information - how to take advantage of the optional Wonder Fence's advanced features, cut perfect fitting rabbets and dadoes, and it has full-length instructions for box joints and the four most common styles of dovetail joints.

Incra Router Plate Reference: