|
Function (listed alphabetically) |
Recommended Equipment |
|
Back
Clearance Angle |
Precision protractor |
|
Bolt
(Pin) Holes (diameter of holes) |
Set of
pin gauges, or caliper |
|
Bore |
Bore
gauge set, Mitutoyo #511-164 |
|
Bolt
Circle Diameter |
6" to
8" dial caliper |
|
Brazing |
10 X
lens |
|
Concentricity |
Test
Arbor, Dial Indicator |
|
Diameter (Outside) |
Large
caliper |
|
Diameter Of Slot Relief Hole |
Set of
pin gauges or caliper |
|
Face
Outset (Carbide) |
Dial
Caliper |
|
Finish |
Surface roughness analyzer (Gould
Surfanalyzer #7100) |
|
Flatness |
Test
Arbor, dial indicator |
|
Gullet
Area |
Trace
gullet on 1/8" graph paper, count the
squares that are over 1/2 full, |
|
|
divide
the total by 64 to get sq-in. |
|
Gullet
Profile |
Compare to sample |
|
Hardness |
Rockwell Hardness tester ("C" scale for
steel, "A" for carbide) |
|
Height
Above Back (Carbide) |
Dial
Caliper |
|
Hook
Angle |
Precision Protractor |
|
Kerf |
1"
C-type micrometer |
|
Length
Of (Carbide) Tips |
6"
Dial Caliper |
|
Pitch |
6"
Dial Caliper |
|
Radial
Clearance Angle |
0-1"
micrometer w/pointed anvils |
|
Runout |
Test
Arbor, dial indicator |
|
Side
Clearance |
Side
Clearance Gauge |
|
Spline |
Inside
micrometer or caliper, size depends on
spline |
|
Tangential Clearance Angle |
0-1"
micrometer w/pointed anvils |
|
Thickness (Saw Plate/Carbide) |
1"
C-type micrometer Starrett #216 FL-1 |
|
Top
Clearance Angle |
Precision Protractor |
