Braze Alloys Technical Information

This information is taken from two of our books; Building Superior Brazed Tools 2008 and Braze Failure Analysis 2008

Braze alloys	How to Braze	Braze Failure Analysis
1. Braze Alloys (Silver Solders)	10. Brazing and Welding – Differences	19. Simple Solutions
2. Brazing with Trimetal Shims	11. Brazing Carbide in a Notch	20. Trouble Shooting Braze Failure
3. Flux	12. Cleaning Steel Before Brazing	21. A Truly Horrible Saw Blade
4. How Fluxing Affects Brazing	13. Brazing To Laser Cut Steel	22. Cutter Failure – Bad Surfaces And Too Much Heat
5. Pretinning	14. Brazing Process Overview	23. Router Bit Failure
6. Choosing the Right Braze Alloy	15. Brazing Tungsten Carbide	24. Debarker Tip Breakage and Loss
7. Braze Alloy Sizes and Yields	16. Advanced Brazer Training	25. Bad Surface Treatment and Bad Gumming
8. Brazing Gases	17. Welding Tungsten Carbide	26. Holes in Braze Alloy Under Failed Tips
9. Special Projects	18. How Much Braze Alloy to Use	27. Pushing All the Alloy Out of the Joint