Woodpeckers WPDPPACK1 - Complete Woodpecker Drill Press Table Includes Drill Press Table, 36" Fence, (2) Flip Stops, (2) Hold Down Clamps, (1) DP Filler.

Try Woodpecker's NEW Drill Press Table with Knuckle Clamps, the WPDPPACK2.

The new 16 x 23 x 1" thick Woodpeckers Drill Press Table has been completely redesigned from the ground up to give you better clamping T-Track, low-friction Micro-Dot laminate, super durable edge banding and a low price with options to add what you need.

It starts with an improved T-Track design: Two double wide T-Tracks are embedded and bolted in place with 1/4-20 bolts from underneath. This fastening approach virtually eliminates the possibility of pull out. Each T-Track is then permanently laser engraved with an easy to read, high contrast scale clearly indicating fence position. Once calibrated to Woodpeckers' drill press, no further adjustment is needed.

Next they improved the fence by using this same double wide track giving you more stop and accessory mounting options including simple L Stops and Flip Stops. Like the embedded track, the 36" long fence is engraved with a center type scale (zero in the center) making it very easy to use. The fence is firmly locked in place front to back and left to right. Making fence adjustments takes seconds with no tools.

The best improvement is the new Micro-Dot laminate table surface. Micro-Dot is a new product in the laminate market that has a unique texture, a grid of small circular pockets that allows saw dust to collect and act as little ball bearings. The .050" thick laminate has a non-glare satin finish that reduces glare and improves the visual alignment of the work piece. The edges of the table are protected with a very durable, high density banding permanently bonded to the MDF core. Each table includes (1) tear-out eliminating filler that can be easily replaced with any 1/2" thick material and pre-cut fillers (available in 3-Packs).

The Woodpeckers Drill Press Table is designed to fasten to slotted steel tables with coarse thread screws and to T-Slotted tables with large oval nuts. (Slotted table installation requires user drilled, counter bored holes.) Hardware included. Designed for 12" and larger drill presses.